Results 1 to 2 of 2

Thread: Not all Rods are Harrington, also Dr Nuzzio pediatrics

  1. #1
    Join Date
    May 2008
    Location
    reno,nevada
    Posts
    4,160

    Not all Rods are Harrington, Dr Nuzzio pediatrics

    Many people associate spinal hardware with the old Harrington system. "I've got Harrington Rods" "No you don't". Post your x-rays, lets take a close look.

    This is incorrect. The Doctor has labeled it a Harrington and its a Luque (I suspect this as a foreign language interpretation problem)
    https://www.researchgate.net/figure/...fig1_230723364

    Not all Rods are Harrington
    https://link.springer.com/article/10...Fs002470050026

    First Generation: The original Harrington system had 2 rods. Distraction and Compression. The distraction rods had the tapered (barb) sections up at the top which was the area where the top clamp was located using a split washer (Adjustable) The bottom used an o-ring groove (or machined collar) to support the bottom clamp.(Non-adjustable) The compression rod had a long threaded section and they used nuts to adjust those multiple clamps. Both Distraction and Compression rods used clamps. The whole Harrington system can be seen in the 2nd x-ray in the article. (X-ray with 2 cross members) above #13

    Second Generation: The Luque system consisted of 2 "L" shaped rods. This system used wires. Some surgeons also used hooks with this system

    I have attached examples below. Harrington, Luque, and Hybrid set-ups.

    Dr Nuzzio talks about braces and hardware systems. He works with kids, kids with severe problems. I would take my child to see him. I think Dr Errico went down to Florida. Both are incredible surgeons....

    http://www.pediatric-orthopedics.com...scoliosis.html

    http://www.pediatric-orthopedics.com/index.html

    http://www.pediatric-orthopedics.com...reatments.html

    Please realize that the Harrington and the Luque system are hardware systems of the past. Dr Harrington invented his rod system in the 1950's to combat Polios in Houston. I believe around 1960 these systems were first used. Dr Luque invented the Luque Rod system with wires. He was looking for a system since bracing in the heat of Mexico City is difficult for the patient. He launched his system in the mid 1970's.

    The modern spinal systems are far superior which is what they use today.

    Ed
    Attached Images Attached Images
    Last edited by titaniumed; 10-28-2019 at 12:51 AM.
    49 yr old male, now 61, the new 61...
    Pre surgery curves T70,L70
    ALIF/PLIF T2-Pelvis 01/29/08, 01/31/08 7" pelvic anchors BMP
    Dr Brett Menmuir St Marys Hospital Reno,Nevada

    Bending and twisting pics after full fusion
    http://www.scoliosis.org/forum/showt...on.&highlight=

    My x-rays
    http://www.scoliosis.org/forum/attac...2&d=1228779214

    http://www.scoliosis.org/forum/attac...3&d=1228779258

  2. #2
    Join Date
    Sep 2003
    Location
    Northern California
    Posts
    7,120
    Quote Originally Posted by titaniumed View Post
    Many people associate spinal hardware with the old Harrington system. "I've got Harrington Rods" "No you don't". Post your x-rays, lets take a close look.

    This is incorrect. The Doctor has labeled it a Harrington and its a Luque (I suspect this as a foreign language interpretation problem)
    https://www.researchgate.net/figure/...fig1_230723364

    Not all Rods are Harrington
    https://link.springer.com/article/10...Fs002470050026

    First Generation: The original Harrington system had 2 rods. Distraction and Compression. The distraction rods had the tapered (barb) sections up at the top which was the area where the top clamp was located using a split washer (Adjustable) The bottom used an o-ring groove (or machined collar) to support the bottom clamp.(Non-adjustable) The compression rod had a long threaded section and they used nuts to adjust those multiple clamps. Both Distraction and Compression rods used clamps. The whole Harrington system can be seen in the 2nd x-ray in the article. (X-ray with 2 cross members) above #13

    Second Generation: The Luque system consisted of 2 "L" shaped rods. This system used wires. Some surgeons also used hooks with this system

    I have attached examples below. Harrington, Luque, and Hybrid set-ups.

    Dr Nuzzio talks about braces and hardware systems. He works with kids, kids with severe problems. I would take my child to see him. I think Dr Errico went down to Florida. Both are incredible surgeons....

    http://www.pediatric-orthopedics.com...scoliosis.html

    http://www.pediatric-orthopedics.com/index.html

    http://www.pediatric-orthopedics.com...reatments.html

    Please realize that the Harrington and the Luque system are hardware systems of the past. Dr Harrington invented his rod system in the 1950's to combat Polios in Houston. I believe around 1960 these systems were first used. Dr Luque invented the Luque Rod system with wires. He was looking for a system since bracing in the heat of Mexico City is difficult for the patient. He launched his system in the mid 1970's.

    The modern spinal systems are far superior which is what they use today.

    Ed
    Since Harrington rods were used as the rods in the Luque system, it's a bit of a grey area in terms of what they're called. I do, however, still hear people with modern implants say that they have Harrington rods. It's like Kleenex.
    Never argue with an idiot. They always drag you down to their level, and then they beat you with experience. --Twain
    ---------------------------------------------------------------------------------------------------------------------------------------------------
    Surgery 2/10/93 A/P fusion T4-L3
    Surgery 1/20/11 A/P fusion L2-sacrum w/pelvic fixation

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •