Results 1 to 15 of 29

Thread: How do rods break?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    May 2013
    Location
    Grove City, OH
    Posts
    275

    How do rods break?

    I'm assuming most broken rods are the result of a fall or an accident. Is that true? Are there other reasons rods break? Thanks.
    Peg
    61 yrs old
    75 degree lumbar curve with thoracic kyphosis
    T3 - S1 surgery with Dr. Buchowski in St. Louis, on 10/27/14
    Working on healing in Columbus, Ohio!

  2. #2
    Join Date
    May 2008
    Location
    reno,nevada
    Posts
    3,557
    Pseudarthrosis. Non-union. Failed fusion.Titanium termites.....(scoliosis forum humor)

    http://www.orthospine.com/index.php/home-mainmenu-1/67

    http://www.ncbi.nlm.nih.gov/pubmed/19652031

    http://www.srs.org/patient_and_famil...darthrosis.htm


    This is one of our goals, to fuse.....if not, the constant bending back and forth will break the rod or rods. Like a paperclip, bend back and forth and it will break.

    After we fuse, the rods simply hang out, and possibly prevent remodeling over time....People that are fused that have rods removed have to worry about this if extreme unbalanced forces constantly pull on the spine. We know this from the elder scolis that were done with casts or casting method many years ago, before Harrington rods. Pre 1960.

    If rods are broken due to a pseudarthrosis, that means that there is movement at that joint, and nothing binds it. The spinal cord runs through there so this is something to think about.

    Dr Lenke has found pseudarthrosis in patients 8 years post. For those that fuse, or fuse in a correct manner, the fusion mass becomes stronger in time. For those that don’t, the fusion material can be mushy and soft like cheesecake.

    For those just out of the oven, getting into a car accident can be a disaster.......for the first few weeks, its probably best to not get in a car.....

    Ed
    Last edited by titaniumed; 04-19-2015 at 01:16 AM.
    49 yr old male, now 59, the new 55...
    Pre surgery curves C12,T70,L70
    ALIF/PLIF T2-Pelvis 01/29/08, 01/31/08 7" pelvic anchors BMP
    Dr Brett Menmuir St Marys Hospital Reno,Nevada

    Bending and twisting pics after full fusion
    http://www.scoliosis.org/forum/showt...on.&highlight=

    My x-rays
    http://www.scoliosis.org/forum/attac...2&d=1228779214

    http://www.scoliosis.org/forum/attac...3&d=1228779258

  3. #3
    Join Date
    May 2008
    Location
    reno,nevada
    Posts
    3,557
    I have Synthes “Pangea” system for my hardware. They provide “Pre-bent” rods with the lordotic and kyphotic bends pre formed. They must be annealing after the bend, its another re-heating process that stress relieves the metal. Metals stress upon bending and each metal is different in this regard. The heat treating and stress relieving information that they use is most likely a secret......They must be providing different bends for each sagittal spine shape. (Again, side view)

    This system also is designed so that pedicle screws cannot back out. Due to the design, its impossible with the locking caps.

    They also do not recommend cross members for patients with DDD. Degenerative Disc Disease.

    Bending any kind of metal will weaken it in any state. Bending it in one direction is one thing, but bending it “back” causes major internal fatigue.

    Ed
    Last edited by titaniumed; 04-19-2015 at 12:28 AM. Reason: going blind
    49 yr old male, now 59, the new 55...
    Pre surgery curves C12,T70,L70
    ALIF/PLIF T2-Pelvis 01/29/08, 01/31/08 7" pelvic anchors BMP
    Dr Brett Menmuir St Marys Hospital Reno,Nevada

    Bending and twisting pics after full fusion
    http://www.scoliosis.org/forum/showt...on.&highlight=

    My x-rays
    http://www.scoliosis.org/forum/attac...2&d=1228779214

    http://www.scoliosis.org/forum/attac...3&d=1228779258

  4. #4
    Join Date
    Dec 2008
    Location
    illinois
    Posts
    766
    Do you think an imbalance can cause stress on the hardware?. Do you also think that no matter what, the type of spines that scoliosis people have , that it wants to curve?
    T10-pelvis fusion 12/08
    Fractured t-9 six days out of surgery
    C5,6,7 fusion 9/10
    PJK at t-9
    T2--T10 fusion 2/11
    Removal of left side t6-t10. 8/14
    C 4-5 fusion 11/14
    Right scapulectomy 6/15
    Right pectoralis major muscle transfer to scapula
    To replace the action of Serratus Anterior muscle 3/16

  5. #5
    Join Date
    May 2008
    Location
    reno,nevada
    Posts
    3,557
    Quote Originally Posted by jackieg412 View Post
    Do you think an imbalance can cause stress on the hardware?. Do you also think that no matter what, the type of spines that scoliosis people have , that it wants to curve?
    This seems logical.....the higher the imbalance the more stress.....I take it you are asking about your thoracic with single rods now. But you are fused through that area.....

    There are quite a few different types of curves, almost infinite, Lenke classifications and so forth. It would seem that larger curves would involve involve more force. This is a difficult question.

    I have posted here in the past a few times now about simply increasing hardware size to help eliminate breakage but they do want some movement......not too much, but some.

    Tensile screw pullout forces on the Synthes site run around 800 footpounds. I forget what material was tested, but even so this is a HIGH force.

    When you bend over in your immediate recovery, every patient needs to think 800# When they say no bending, they mean it.

    I can provide links after more coffee (smiley face)

    Ed
    49 yr old male, now 59, the new 55...
    Pre surgery curves C12,T70,L70
    ALIF/PLIF T2-Pelvis 01/29/08, 01/31/08 7" pelvic anchors BMP
    Dr Brett Menmuir St Marys Hospital Reno,Nevada

    Bending and twisting pics after full fusion
    http://www.scoliosis.org/forum/showt...on.&highlight=

    My x-rays
    http://www.scoliosis.org/forum/attac...2&d=1228779214

    http://www.scoliosis.org/forum/attac...3&d=1228779258

  6. #6
    Join Date
    Jan 2008
    Location
    Oregon
    Posts
    1,162

    Angry broken rods

    Great posts Ed, you said it all! My rods broke from psuedoarthrosis (failure to fuse) at two adjacent levels. One rod broke at the level of around L3, the other at L4, both at the same time. I felt and heard both rods snap, there was no question in my mind they were both broken. I had an extremely loud "pop" about 3 weeks before that x-rayed ok, but I now believe it was one rod cracking but staying perfectly aligned so the break could not yet be seen on x-ray.

    I am a nurse in a cardiac cath lab, and was at work when I had the first big "pop." People standing 6 feet away clearly heard it, and the patient in the room thought it was an electrical breaker being tripped. It was that loud. I wan't doing anything out of the ordinary when that happened, and I had suffered no falls or accidents. Pretty scary stuff…I was doing so well right up to that point. I had one titanium rod and one chromium cobalt rod, a system my surgeon chose for extra strength and stiffness since my spine was extremely unstable. I was his first patient to break the new super-duper chromium cobalt rod. Good news is that Dr Hart got me all fixed up again, and I am doing great these days.
    Gayle, age 50
    Oct 2010 fusion T8-sacrum w/ pelvic fixation
    Feb 2012 lumbar revision for broken rods @ L2-3-4
    Sept 2015 major lumbar A/P revision for broken rods @ L5-S1


    mom of Leah, 15 y/o, Diagnosed '08 with 26* T JIS (age 6)
    2010 VBS Dr Luhmann Shriners St Louis
    2017 curves stable/skeletely mature

    also mom of Torrey, 12 y/o son, 16* T, stable

  7. #7
    Join Date
    Sep 2003
    Location
    Northern California
    Posts
    6,802
    Quote Originally Posted by PeggyS View Post
    I'm assuming most broken rods are the result of a fall or an accident. Is that true? Are there other reasons rods break? Thanks.
    It looks like no one said anything about falls or accidents. Broken implants from trauma is VERY rare.

    --Linda
    Never argue with an idiot. They always drag you down to their level, and then they beat you with experience. --Dilbert
    I'm sarcastic... what's your super power? --Unknown
    ---------------------------------------------------------------------------------------------------------------------------------------------------
    Surgery 2/10/93 A/P fusion T4-L3
    Surgery 1/20/11 A/P fusion L2-sacrum w/pelvic fixation
    ---------------------------------------------------------------------------------------------------------------------------------------------------
    If you've signed up and are having trouble posting, please check your spam folder. An email was sent to the email address which you subscribed. You have to follow the instructions in that email. Done that and still having trouble posting? Contact Joe O'Brien at jpobrien@scoliosis.org.

  8. #8
    Join Date
    Jan 2008
    Location
    Oregon
    Posts
    1,162

    Broken rods twice

    Hi, I am one of the unlucky few who has suffered broken rods twice (broke both rods on two separate occasions). Neither time was related to trauma or falls, but to pseudoarthrosis. Apparently I don't fuse well. I wouldn't wish this problem on anyone!
    Gayle, age 50
    Oct 2010 fusion T8-sacrum w/ pelvic fixation
    Feb 2012 lumbar revision for broken rods @ L2-3-4
    Sept 2015 major lumbar A/P revision for broken rods @ L5-S1


    mom of Leah, 15 y/o, Diagnosed '08 with 26* T JIS (age 6)
    2010 VBS Dr Luhmann Shriners St Louis
    2017 curves stable/skeletely mature

    also mom of Torrey, 12 y/o son, 16* T, stable

  9. #9
    Join Date
    May 2008
    Location
    reno,nevada
    Posts
    3,557
    Linda, your right!

    That’s because we are not even allowed to think about these things....

    Car accidents are a disaster.....we had one poster here a few years ago that posted about this but she never followed up with us. Remember? She was in a lot of pain.....

    When autonomous cars become popular here shortly, it will be a different story. The problem will be programming the destination on meds. Can you imagine at the hospital, they usually ask who is driving you home. “I have a self driving vehicle here, can you program it so it will take me home?” Please don’t send me to Disneyland, I don’t think I can handle Mickey Mouse right now. (smiley face)

    Ed
    49 yr old male, now 59, the new 55...
    Pre surgery curves C12,T70,L70
    ALIF/PLIF T2-Pelvis 01/29/08, 01/31/08 7" pelvic anchors BMP
    Dr Brett Menmuir St Marys Hospital Reno,Nevada

    Bending and twisting pics after full fusion
    http://www.scoliosis.org/forum/showt...on.&highlight=

    My x-rays
    http://www.scoliosis.org/forum/attac...2&d=1228779214

    http://www.scoliosis.org/forum/attac...3&d=1228779258

  10. #10
    Join Date
    Dec 2008
    Location
    illinois
    Posts
    766
    Ed you are so funny😆
    T10-pelvis fusion 12/08
    Fractured t-9 six days out of surgery
    C5,6,7 fusion 9/10
    PJK at t-9
    T2--T10 fusion 2/11
    Removal of left side t6-t10. 8/14
    C 4-5 fusion 11/14
    Right scapulectomy 6/15
    Right pectoralis major muscle transfer to scapula
    To replace the action of Serratus Anterior muscle 3/16

  11. #11
    Join Date
    Aug 2010
    Location
    Florida
    Posts
    225
    Ok, so I guess I need to get straight on terminology. If you have a 2-part procedure where they start with an anterior incision and finish with posterior, that is correctly abbreviated ALIF/PSF, rather than what I wrote? And what, then, is PLIF?

    And if all circumferential fusions have low incidence of pseudarthrosis (pseudoarthrosis is wrong?), then are the non-unions and broken rods occurring in people with non-circumferential fusions or just in people with bad luck, or is some other factor involved? Or do we even know?
    Stephanie, age 56
    Diagnosed age 8
    Milwaukee brace 9 years, no further treatment, symptom free and clueless until my 40s that curves could progress.
    Thoracolumbar curve 39 degrees at age 17
    Now somewhere around 58 degrees thoracic, 70 degrees thoracolumbar
    Surgeon Dr. Michael S. O'Brien, Baylor's Southwest Scoliosis Center, Dallas TX
    Bilateral laminectomies at L3 to L4, L4 to L5 and L5 to S1 on April 4, 2012
    Foramenotomies L3 through S1 in August 2014

  12. #12
    Join Date
    Jul 2016
    Location
    Banner Elk, NC
    Posts
    5

    Wink Broken Hardware and non-fusion L5-S1

    In June of 2016 I was using my body force pushing myself down to reach below where I could physically reach and heard a really LOUD pop. It smarted a bit but the actual pain didn't come until a few hours later and has gradually gotten worse. Fast forward to this past Thursday, I had an appointment with a neurosurgeon at Wake Forest Baptist Health who will surgically correct my broken titanium rod and non-fusion and will replace the loose "thingy" like a metal spacer but not a spacer inbetween L5-S1. It is nice to be here amongst people who have the same body type and have lived very similar lives. I will post my history later and there are some that I think I know from different forums. The surgeon's scheduler will call me with a surgery date. The surgeon does these procedures with the assist of a vascular surgeon who goes in first to move everything out of the way and then back in place afterwards. This will be done from the anterior side. I'm guessing I'll be more sore from the incision through the belly than from the actual procedure. They said the hospital stay would be anywhere from 1 1/2 to 3 days, depending on how I'm doing. How did ya'll do in the recovery department?

    LindaG

  13. #13
    Join Date
    Jun 2013
    Location
    NYC
    Posts
    61
    Quote Originally Posted by Spine View Post
    In June of 2016 I was using my body force pushing myself down to reach below where I could physically reach and heard a really LOUD pop. It smarted a bit but the actual pain didn't come until a few hours later and has gradually gotten worse. Fast forward to this past Thursday, I had an appointment with a neurosurgeon at Wake Forest Baptist Health who will surgically correct my broken titanium rod and non-fusion and will replace the loose "thingy" like a metal spacer but not a spacer inbetween L5-S1. It is nice to be here amongst people who have the same body type and have lived very similar lives. I will post my history later and there are some that I think I know from different forums. The surgeon's scheduler will call me with a surgery date. The surgeon does these procedures with the assist of a vascular surgeon who goes in first to move everything out of the way and then back in place afterwards. This will be done from the anterior side. I'm guessing I'll be more sore from the incision through the belly than from the actual procedure. They said the hospital stay would be anywhere from 1 1/2 to 3 days, depending on how I'm doing. How did ya'll do in the recovery department?

    LindaG
    Hi LindaG - I feel like I can answer this one! Right up my alley. I am 5 weeks post-op, back at work, off the pain meds, but still having a lot a pain. Although not broken rod pain, just surgical pain. The advice everyone gave me here was "get 'er done." Which helped me feel right about having the revision surgery. Best of luck!
    Surgery June 18 by Dr. Errico at NYU Hospital for Joint Diseases at age 41.
    Fused T10-Pelvis.
    "Ask me about my brand new lordosis!"

  14. #14
    Join Date
    Sep 2003
    Location
    Northern California
    Posts
    6,802
    Quote Originally Posted by Spine View Post
    In June of 2016 I was using my body force pushing myself down to reach below where I could physically reach and heard a really LOUD pop. It smarted a bit but the actual pain didn't come until a few hours later and has gradually gotten worse. Fast forward to this past Thursday, I had an appointment with a neurosurgeon at Wake Forest Baptist Health who will surgically correct my broken titanium rod and non-fusion and will replace the loose "thingy" like a metal spacer but not a spacer inbetween L5-S1. It is nice to be here amongst people who have the same body type and have lived very similar lives. I will post my history later and there are some that I think I know from different forums. The surgeon's scheduler will call me with a surgery date. The surgeon does these procedures with the assist of a vascular surgeon who goes in first to move everything out of the way and then back in place afterwards. This will be done from the anterior side. I'm guessing I'll be more sore from the incision through the belly than from the actual procedure. They said the hospital stay would be anywhere from 1 1/2 to 3 days, depending on how I'm doing. How did ya'll do in the recovery department?

    LindaG
    Most anterior surgeries are now done by splitting the muscle as opposed to cutting the muscle. When I had A/P surgery 5 years ago, I essentially had no anterior pain.

    --Linda
    Never argue with an idiot. They always drag you down to their level, and then they beat you with experience. --Dilbert
    I'm sarcastic... what's your super power? --Unknown
    ---------------------------------------------------------------------------------------------------------------------------------------------------
    Surgery 2/10/93 A/P fusion T4-L3
    Surgery 1/20/11 A/P fusion L2-sacrum w/pelvic fixation
    ---------------------------------------------------------------------------------------------------------------------------------------------------
    If you've signed up and are having trouble posting, please check your spam folder. An email was sent to the email address which you subscribed. You have to follow the instructions in that email. Done that and still having trouble posting? Contact Joe O'Brien at jpobrien@scoliosis.org.

  15. #15
    Join Date
    Jan 2016
    Location
    Sioux City, Iowa
    Posts
    91
    Quote Originally Posted by Spine View Post
    In June of 2016 I was using my body force pushing myself down to reach below where I could physically reach and heard a really LOUD pop. It smarted a bit but the actual pain didn't come until a few hours later and has gradually gotten worse. Fast forward to this past Thursday, I had an appointment with a neurosurgeon at Wake Forest Baptist Health who will surgically correct my broken titanium rod and non-fusion and will replace the loose "thingy" like a metal spacer but not a spacer inbetween L5-S1. It is nice to be here amongst people who have the same body type and have lived very similar lives. I will post my history later and there are some that I think I know from different forums. The surgeon's scheduler will call me with a surgery date. The surgeon does these procedures with the assist of a vascular surgeon who goes in first to move everything out of the way and then back in place afterwards. This will be done from the anterior side. I'm guessing I'll be more sore from the incision through the belly than from the actual procedure. They said the hospital stay would be anywhere from 1 1/2 to 3 days, depending on how I'm doing. How did ya'll do in the recovery department?

    LindaG
    Hi. I had A/P surgery June 2016 and I was very nervous about the abdominal incision. Much to my surprise, I had no pain, or very little pain, in my abdominal incision. Having said that, I was on heavy narcotics for 2 weeks to where I don't remember much, so maybe I had pain and just didn't know it. But, by the time I was "with it" I don't recall any incision pain. I had lots of pain, but it was mostly muscle / soft tissue pain in my back that takes so much time to heal. My abdomen was fine.

    Kathy
    Decompression surgery L4/L5
    April 3, 2015
    Twin Cities Spine Center - Dr. Joseph Perra
    Fused from T11 - Sacrum anterior/posterior
    June 24, 2016 - 55 years old at surgery
    Twin Cities Spine Center - Dr. Joseph Perra
    Before Surgery: 42 degrees lumbar, 28 degrees thoracic
    After Surgery: 10 degrees lumbar, ?? Thoracic
    2 inches taller

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •